Advice

What each part of a satellite system actually does

Four things stand between a satellite and your lounge, and each one fails in a way that looks like the others. Knowing what each part is for makes the difference between guessing at a fault and locating it.

Satellite dish seen from behind against a clear sky, showing the LNB on its support arm

Satellite television is one of those systems that people live with for twenty years without ever being told how it works. That is fine until something stops, at which point the absence of a mental model turns every fault into a mystery and every quote into a leap of faith.

It is not a complicated chain. There are four parts, they do four distinct jobs, and once you know which part does what, most symptoms sort themselves into place.

The dish itself does not receive anything

This surprises people, because the dish is the visible part and gets the blame for everything. It is not a receiver. It is a mirror.

The signal coming down from the satellite arrives spread thinly over a wide area, far too faint at any single point to do anything useful with. The dish is curved in a specific shape so that whatever lands anywhere on its surface is bounced towards one small point in front of it. Everything the dish collects across its whole face is concentrated there, which turns something unusably weak into something a receiver can work with.

Two things follow from that, and both explain faults people find baffling. First, the shape has to be right: a dish that has been dented, bent by a falling branch or buckled by a bad mounting no longer focuses properly and loses signal even though it looks like it is pointing the right way. Second, the whole surface matters, so anything sitting in front of part of the dish is taking a share of the signal away, not just casting a shadow.

The LNB is the part that actually receives

The small unit on the arm, sitting out in front of the dish, is the LNB. It is positioned at exactly the point where the dish concentrates everything it has collected, which is why the arm holds it out at that distance rather than tucking it away neatly against the dish.

It does two jobs. It receives the concentrated signal, and it converts it into a form that can survive a run down an ordinary coaxial cable into the house. Straight off the dish, the signal is at a frequency that would be almost entirely lost in a few metres of cable. The LNB shifts it down to something the cable can carry the length of a house without losing much.

Because the LNB is doing electronic work, it needs power, and that power travels up the same cable that brings the signal down. This is the reason unplugging things at the decoder end has effects at the dish end, and the reason a short in a cable or a connector can produce DStv's E74 and E75 LNB overload messages. It is also the reason the LNB is the part most likely to fail on its own after years outdoors: it is live electronics in a plastic housing, exposed to sun, rain and salt.

The aim has to be far better than it looks

The dish only concentrates signal onto the LNB if it is pointing accurately at the satellite. Point it slightly off and the concentration is imperfect: some of what the dish collects no longer lands on the LNB, and the amount of usable signal drops away quickly for what looks like a trivial movement.

The scale of movement that matters is far smaller than anything you could judge by eye from the garden. This is why a dish can look perfectly normal and be performing badly, and why aiming is done with a meter rather than by lining it up against the neighbour's. It is also why the mounting matters as much as the aim: a bracket that lets the dish flex in a strong wind is un-aiming it every time the wind blows.

North-east, and why the dish never has to move again

In South Africa the dish looks north-east, and it needs an uninterrupted view in that direction. The satellite sits in an orbit that keeps it in the same place in the sky as far as your house is concerned, which is the reason a domestic dish can be bolted rigidly to a wall and never tracked or motorised. Aim it once, lock it down, and it stays right until something physically moves it or grows in front of it.

It also means the direction is not negotiable. There is no aim that goes around a tree, a neighbour's new upper storey or a garage roof, and the sight line runs from the dish outward, not from your roof in general. This is the constraint that decides where a dish can physically go on a property, and it does more to shape a dish installation than anything else about the house.

One cable, carrying more than one thing at a time

The coaxial cable running from the LNB into the house is doing several jobs at once. It carries the converted signal downwards, it carries power to the LNB upwards, and it carries the instructions the decoder uses to tell the LNB which part of the incoming signal it wants.

That last point explains a common confusion. The cable is not carrying one channel; it is carrying a great deal of content simultaneously, and the decoder selects from it. It also explains why feeding several decoders is a design question rather than just a matter of splitting the cable, since two decoders may want different things from the LNB at the same moment. DStv's own answer to that is the Smart LNB, which they describe as combining the features of a DStv Switch into a single UniCable LNB to give a single cable solution for distributing multiple satellite signals. It is meant for single-unit dwellings; DStv states plainly that it is not suitable for multiple unit dwellings, which is why flats and complexes get a different design.

Because the cable is carrying power as well as signal, its condition matters more than people assume. A run that has cracked in the sun, or a connector that has taken in water, degrades both jobs at once.

What the decoder does at the other end

The decoder takes what arrives on the cable, picks out the service you asked for, and reassembles it into a picture and sound. Most of that content is deliberately scrambled at the broadcaster's end, and the decoder can only unscramble what your account is entitled to see. The smartcard is what carries that entitlement, which is why DStv has a whole family of smartcard error codes and why E16, their code for a service that is currently scrambled, is an account matter rather than an equipment one.

This split is the single most useful thing to take away. Everything from the dish to the back of the decoder is about getting enough signal into the room. Everything after that is about permission to watch it. A fault in the first half looks like a picture that breaks up or disappears; a fault in the second half looks like a decoder that is working perfectly and refusing to show you anything. Sorting your symptom into one of those two halves is exactly what the no-signal triage is for.

Why the chain fails in the ways it does

PartWhat it doesHow it typically fails
DishCollects and concentrates a faint signalMoves off aim, gets blocked by growth or building, or is physically deformed
LNBReceives at the focus and converts for the cableDegrades or fails outright after years of weather; housing lets water in
Cable and connectorsCarry signal down and power upWater entry and corrosion at the joints; sheath cracking in the sun
Decoder and smartcardSelects and unscrambles what you are entitled toBox faults, and account states that look like faults but are not

One last thing worth knowing: the dish, the LNB and the cable are not tied to a particular service. OpenView is a free-to-air service with no monthly subscription that connects to an existing satellite dish pointing north-east, so a household that stops paying for a subscription often already owns most of what an OpenView installation needs. The parts that decide what you can watch sit at the decoder end of the chain, not on the roof.

Questions we get asked

Why is a satellite dish curved rather than flat?
Because the curve is what does the work. A flat sheet reflects the signal straight back out in the direction it came from, which is no use to anybody. The specific curved shape sends everything that lands on the dish towards one point in front of it, concentrating a very faint signal into something strong enough to receive.
Why does the LNB sit out on an arm instead of in the middle of the dish?
Because that is where the dish sends the signal. The arm exists purely to hold the LNB at the point where everything the dish collects is concentrated. Move the LNB out of that position, even slightly, and the dish is focusing its signal onto thin air next to it.
Does the dish send anything back up to the satellite?
No. A domestic satellite television dish only receives. That is worth knowing because it means your dish cannot interfere with the neighbour's, and it is also why an internet connection to the decoder is a separate matter that runs over your home network rather than through the dish.
The satellite is in orbit and my dish never moves. How does that work?
The satellite is in the kind of orbit that keeps it in a fixed position relative to the ground, so from your roof it never appears to go anywhere. That is why a domestic dish can be bolted down permanently and aimed once. If the satellite drifted across the sky, every house would need a motorised dish tracking it.
Why does a weak digital picture break into blocks instead of going grainy?
Because the decoder is reconstructing the picture from data rather than displaying a signal directly. While enough data arrives, the picture is perfect; when too much is missing, the decoder can only rebuild parts of it, which is what the blocking and freezing are. Below that point it has nothing to work with and gives up entirely, which is why the failure feels so abrupt.
Does the single cable really carry every channel at once?
It carries far more than the one you are watching, and the decoder selects from what arrives. That is why one cable can serve a decoder at all, and why feeding several decoders from one dish needs proper design rather than an ordinary splitter from a hardware shop.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za