TV Repairs · Cape Town
Backlight repairs: the sound plays and the screen stays dark
A black screen with working sound is the fault people most often assume is fatal, and it is usually one of the most repairable things a television does. Thirty seconds with a torch will tell you which it is.

Behind the picture in an LED television are rows of small LEDs on metal strips, with a diffuser and a set of films spreading their light evenly across the back of the panel. The panel itself makes no light. It only blocks and colours the light coming from behind it. So when the LEDs stop working, the picture is still being drawn, perfectly, in the dark.
That is why the classic symptom is so specific: sound carries on, the remote still works, the menu appears if you shine a light on the screen, and yet the television looks completely dead from the couch.
The torch test takes thirty seconds
Do this before you call anyone, ours included.
Switch the set on and turn the room lights off
Leave a source playing that you know has picture and sound, or bring up the television's own menu with the remote.
Hold a torch close to the screen at an angle
A phone torch is fine. Hold it 5 to 10 centimetres from the glass, angled across the surface rather than straight at it, and move it slowly. Look past the reflection.
Look for a faint image
If you can make out the menu, a channel logo or the shape of a picture, the panel is alive and being driven correctly. The fault is the light behind it.
If you see nothing at all
That points somewhere else, usually at the board driving the panel or at the panel itself. It is still worth having tested, because the torch test is easy to do badly in a room that is not properly dark.
What the test means for the bill
A positive torch test is good news. It moves the fault out of the panel, which is the part that is not economically replaceable, and into the backlight and its power circuit, which is a repair we do routinely and on site.
How LED backlights fail
The LEDs run hot and they run for years, and they fail in a few recognisable ways.
- One LED goes open circuit and takes the whole string with it, because the LEDs on a strip are wired in series like old Christmas lights
- A strip develops several failing LEDs at once, so the picture is dim or blotchy before it goes altogether
- The reflective coating or the lens on individual LEDs degrades with heat, showing as dark patches or a mottled look on bright scenes
- The driver circuit on the power board fails, so healthy strips get no current at all
- Protection trips: the set senses a fault in the backlight circuit and shuts the light down deliberately, which is why some televisions show a picture for a second on start-up and then go black
That last one is worth knowing about. A set that flashes a picture for a moment and then goes dark has not thrown a random fault; it has tested its own backlight, found something wrong and protected itself. It is a strong indicator, not a mystery.
Dim, uneven or patchy rather than black
Backlight problems do not always arrive as a black screen. Clouding in one corner, a band along the bottom that is darker than the rest, a picture that is watchable but has lost its brightness over a year or two: those are the same family of fault, caught earlier. People often assume the panel is failing, and it usually is not. There is more on that distinction on the screen and panel page.
What the repair actually involves
The set has to be opened from the front. The bezel comes off, the panel and its layers of diffuser film are lifted clear in a specific order, and the strips underneath are exposed. Every failed LED is found by testing rather than by eye, because a burnt one is obvious and a marginally failing one is not.
From there it is either individual LEDs replaced on the strip, or complete strips swapped for new ones. Which we do depends on the set: on some models the LEDs are a common type and replacing the failures is clean and lasting, and on others the strips are cheap enough and awkward enough that replacing all of them is the better job. We also check the driver side of the power board while we are in there, because a driver that has been running a failing string hard is worth testing before the set is closed up.
Then it is reassembled. The films go back in exactly the order and orientation they came out, the panel is handled by its edges, and every speck of dust that gets trapped inside will be visible on a white screen forever after, so this is a job that rewards patience more than speed.
On site or on the bench
Most backlight jobs we do in the home, on a dining table with the set flat and a clean working area, which saves the television a round trip. Very large screens, sets in cramped positions and models with an awkward front assembly sometimes come back with us instead. The technician decides that at the diagnosis, before anything is opened, and tells you which it will be. The wider picture of what we do and do not do on site is on the main TV repairs page.
Faults that get mistaken for a dead backlight
Several other problems produce a black screen, and the torch test is what separates them:
- No sound either, and no standby light: that is a power supply fault, covered on the page for a set that will not switch on
- Black from one input only, with other sources fine: an HDMI or input board fault
- Black screen with a source connected but the television's own menu visible: the source or the cable, not the set
- A picture with lines, bars or a crack rather than pure black: panel territory, not backlight
- Everything works but the set has been left on a picture setting with brightness at zero, which happens more often than you would think after somebody has been in the menu
Brand-specific notes
Backlight design varies by make and by screen size, and so does the availability of the right strips. If you know your set, start at Samsung, LG or Hisense repairs.
Questions we get asked
Is a black screen with working sound always a backlight fault?
Do you replace all the strips or only the one that failed?
My picture is dim in one corner rather than black. Is that the same problem?
Can a backlight repair be done in my house?
Will the backlight just fail again?
The TV shows a picture for one second and then goes black. What is that?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za