OpenView · Cape Town
OpenView installation, and what free-to-air actually means
OpenView is satellite television with no monthly subscription fee. That makes it a different decision from DStv rather than a cheaper version of it, and this page is written around the questions people actually ask before they commit.

The thing that brings most people to OpenView is straightforward. There is no monthly bill. It is a free-to-air satellite service, so once you own the equipment the service itself costs you nothing each month, and the only running cost after that is the electricity the decoder uses. The money is spent once, at the start, instead of every month for as long as you want a picture.
We install and repair OpenView across Cape Town from our base in Thornton. We are an independent business with no connection to OpenView or to MultiChoice, which is worth saying up front: we have no reason to push you towards either service, so this page tells you what OpenView does not give you as plainly as what it does.
What no monthly fee actually buys you
OpenView's own description of the service is "over 20 TV and radio channels", and that line-up includes SABC channels and e.tv. We are deliberately not printing a precise number here. Line-ups change, a number typed into a web page does not, and the gap between the two is how people end up disappointed. If there is a particular channel your household watches, spend thirty seconds checking the current line-up on OpenView's own site before you buy anything. That settles it properly in a way that no installer's page can.
What you should not expect is that OpenView will quietly hand back everything a subscription used to give you. It is a different service with a different line-up, not a discounted version of the same one. If your viewing is built around a specific sports competition or a particular series on a particular channel, check that it is there rather than assuming. Households whose television is mostly news, local channels and general entertainment are the ones who tend to switch and not think about it again.
The decoder named on OpenView's site is the OV512. Beyond the satellite channels, it offers additional on-demand content over Wi-Fi, so the box sits on your home network as well as on the dish feed. That side is optional - the satellite channels do not need the internet, and the decoder runs perfectly well in a house with no Wi-Fi at all.
- No monthly subscription fee - the service is free once you own the equipment
- Over 20 TV and radio channels by OpenView's own count, including SABC channels and e.tv
- The OV512 decoder, with additional on-demand content over Wi-Fi
- A dish with a clear line of sight to the north-east, which you may already have on the wall
OpenView next to DStv, without the sales pitch
Most of the people who phone us about OpenView are not choosing between two unknowns. They have DStv now and they are working out what changes if they stop. Here is the honest version.
| What you are comparing | OpenView | DStv |
|---|---|---|
| Monthly cost | No monthly subscription fee. The service is free once you own the equipment. | A paid subscription, at whatever the package you choose costs. |
| Channels | OpenView claims over 20 TV and radio channels, including SABC channels and e.tv. | Decided by the package. Worth checking the current line-up rather than going on memory. |
| Decoder | The OV512. | DStv's own decoders, the Explora among them. |
| If you stop paying | There is nothing to stop paying. | A decoder without an active subscription shows E17, which DStv's error list describes as No Active Subscription. |
That last row decides it for a lot of households. A subscription decoder with nothing behind it is a box showing an error, while the dish outside carries on doing nothing at all. If you have already cancelled, the equipment on your wall is a starting point rather than scrap.
The dish on your wall may already be the right dish
OpenView connects to an existing satellite dish pointing north-east. In practical terms that means a household with a redundant DStv dish can often reuse it, and reusing it is both cheaper and faster than putting a new one up. This is the single most useful thing we tell people on the phone, and it is the reason we ask you not to take the old dish down before we have looked at it.
We check the mounting first and the electronics second. A bracket still fixed into something that will hold it is most of the value of the old installation. After that it is the condition of the dish, the state of the LNB and the connectors, and the cable run into the house. Any of those can be replaced on its own. Dish installation and alignment for OpenView covers that assessment, and what happens if the aim drifted while the dish stood unused.
If you are still on DStv and thinking about it, our DStv installation pages explain how the same four parts fit together on that side, and dish alignment is worth a read if your current picture has been getting worse. A dish that was already struggling on DStv will struggle on OpenView too, because the problem is outside and has nothing to do with which service is paying for the channels.
Running both, or moving from one to the other
Plenty of Cape Town households do not switch at all. They keep the subscription on the main television and put OpenView on the second set, in the flatlet or in the room that gets two hours of viewing a week. With no monthly fee on the OpenView side, the second box costs nothing to keep running once it is in.
Feeding both off one dish is a question about the LNB on the arm and the cabling that already exists, not about the two services disliking each other. It is settled on site by looking at what is up there. Sometimes it is a straightforward extra run, and sometimes the honest answer is that a second feed means a second cable - which we would rather say at the quoting stage than halfway through an afternoon.
For households going the other way and cancelling entirely, the old decoder is worth keeping in a cupboard for a month or two rather than throwing out immediately. People change their minds, and the error on the screen is a subscription state rather than a broken box - DStv decoder and smartcard errors covers which messages mean the hardware has failed and which mean the account has.
What the installation involves
We establish what is already on the property
A dish, a bracket, a cable through the wall, an old wall plate behind the television. Every one of those that survives is work nobody has to pay for. This is also when we find out whether the position still has a clear line of sight to the north-east, because gardens grow and neighbours build.
The dish goes up, or comes back into aim
A new dish needs a position and a bracket fixed into something solid. An existing dish usually needs its aim checked and locked down again, its connectors opened up and looked at, and its LNB tested rather than assumed. Both jobs end the same way - on a meter, not on a guess.
The cable is run and terminated properly
Where there is no usable cable, we run one on a protected route, seal the entry through the wall and leave a drip loop outside. Where cable exists, we test it before trusting it. Old aerial cable pressed into satellite service is a common find and a common cause of a weak picture.
The OV512 is connected and scanned in
The decoder goes onto the television, the channels are scanned, and we check the signal at the decoder rather than taking the reading from the meter outside as the final word. Then we leave it running for a while before packing up, because a marginal installation looks fine for the first two minutes.
The Wi-Fi side, if you want it
The on-demand content on the OV512 comes over your home network, so we put the decoder on the Wi-Fi and check it holds. In a house where the router is at the other end and the signal in the lounge is thin, that is worth knowing on the day rather than a week later. Decoder installation and setup goes through this part in detail.
When something stops working later
There is no monthly subscription to lapse on OpenView, which narrows the field when a picture goes missing. It is a physical problem: the dish, the cable, a connector, the LNB or the decoder. No signal and weak signal on OpenView is the page for a blank or breaking-up picture, and OpenView decoder problems covers the box itself, including what is worth repairing and what is not.
We cover Cape Town from Thornton and do a fair amount of OpenView work in the northern suburbs, the Cape Flats and the southern suburbs - Mitchells Plain, Bellville, Athlone and Parow among them. Tell us your suburb when you book and we will fit the call into a run already heading that way.
If the picture problem turns out to be the television
A set that will not switch on, a black screen with sound, or apps that have stopped loading is a television fault, and no amount of work on the dish will move it. We repair televisions as well - see TV repairs in Cape Town, or TV mounting if the screen is going on the wall while we are already there with the drill.
Questions we get asked
If there is no monthly fee, what am I actually paying for?
I am cancelling DStv. Should I take the dish down?
How many channels will I get?
Can I keep DStv and add OpenView on another television?
Do I need Wi-Fi at home for OpenView to work?
Will OpenView still work in bad weather?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za