DStv · Cape Town

Repairs to DStv installations that have stopped working

Most of our DStv work is not new installations. It is systems that ran perfectly for years and then stopped, and the cause is usually something small, outside the house, and cheaper to put right than people expect.

Corroded satellite cable connector being replaced at the LNB arm

A satellite installation has an indoor half that lives in a warm dry lounge and an outdoor half that spends every winter in driven rain and every summer in the south-easter. Almost every fault we are called to is in the outdoor half. That is worth knowing before you start pricing a new decoder, because the outdoor half is also the inexpensive half.

It is also worth knowing that dramatic symptoms do not mean an expensive repair. Every channel gone, a completely black screen, nothing working at all - that is exactly what a single connector full of water looks like. The severity of what you see on screen tells you almost nothing about the size of the job.

Finding the fault before changing parts

We work from the decoder outwards, because that is the order that costs you the least. Test at the decoder, then at the wall point, then at the far end of the run, then at the LNB. Whichever step is the first to look wrong is where the fault lives, and everything past it is innocent.

The alternative approach - replacing the LNB because an LNB is the usual suspect - is how people end up paying for a new LNB and still having no picture. It happens often enough that we regularly arrive at a house where a part has already been changed and the original fault, a chafed cable behind a gutter, is still sitting there.

What we check on a fault call:

  • Signal at the decoder itself, before anything is unplugged
  • The wall point and any joins, splitters or couplers in the run
  • The full length of the cable for chafing, perishing, staple damage and rodent damage
  • Both connectors, at the LNB end and at the decoder end, for water and corrosion
  • The LNB and its position in the holder
  • The bracket and the fixings, since a loose mount undoes an alignment
  • Whether the line of sight to the north-east is still clear

The faults that start outside the house

Water in a connector

The most common fault we see, by a distance. The connector at the LNB end points at the sky, it is exposed to every front that comes through, and once water tracks into it the copper corrodes and the signal drops away. Sometimes it fails outright, but more often it degrades: a bit of pixelation, then breaking up in bad weather, then nothing. On the coast this happens faster, because salt in the air attacks the connector even in dry weather - it is a routine finding on jobs in Sea Point and along the rest of the Atlantic Seaboard.

Cable that has had enough

Coax on the outside of a house has a working life. Sun perishes the outer sheath, a cable stapled flat against a wall gets crushed over time, a run that crosses a gutter chafes every time the wind moves it, and rodents in a roof space find cable interesting. A cable that looks grey, cracked and chalky has usually already stopped doing its job properly.

LNB failure

The LNB is the only part of the system that is both powered and permanently outdoors, so it does genuinely fail. The pattern that points at an LNB is one that gets worse as the day heats up, or a system that works in the morning and not in the afternoon. Real LNB failures are less common than people assume, though, which is why we test rather than swap - see signal problems for how the overload codes fit into this.

A dish that has moved

Wind, a ladder leaned against the arm during painting, a bracket bolt that has worked loose over ten years. The dish does not have to move much to stop working. If the picture degraded gradually rather than disappearing overnight, or if it fails in wind and comes back when the wind drops, dish alignment is more likely than a failed part.

The faults that start inside the house

Indoor faults are a smaller share of the work but they are real. Wall points get knocked, especially behind furniture that gets moved. Joins made behind a cupboard by whoever lived there before are frequently the weak link in an otherwise sound installation. Splitters fitted to feed a second room can be the wrong sort or simply worn out. And the decoder itself can fail, or show a message that is not about signal at all - decoder and smartcard errors covers those.

If a house has grown a room at a time, the cabling is usually where the history shows. Where the run has been extended and joined more than once, replacing it with a single continuous run often fixes several intermittent problems at the same time, and cabling and TV points explains how we tidy that up.

After a storm or a hard wind

Cape winters produce a specific set of call-outs. A bracket that was marginal for years finally shifts. A cable that was clipped adequately gets pulled loose where it crosses the roof. Water finds the one connector that was sealed in a hurry. Occasionally a dish has simply been rotated by the wind and is now pointing at a hillside.

The useful thing after a storm is to look before you call. From the ground, is the dish still pointing where it used to point? Is the cable still clipped where it was? You do not have to diagnose anything - a photograph of the dish is genuinely helpful to us before we arrive.

Do not climb up to look

A wet roof after a front is not the place to satisfy your curiosity about a bracket, and a dish is easier to knock further out of aim than to put back. Whatever you can see from the ground is enough for us to work with.

The repairs we cannot do

We fix hardware and installations. We cannot do anything about your account. If the screen is showing a message about a subscription, that sits between you and DStv and no installer can change it, so a call-out would cost you a visit and solve nothing. We would rather tell you that on the phone.

Where we do repair something, the work carries a six-month guarantee against the same fault coming back. If you are not sure whether your problem is a repair, a realignment or a fresh installation, the main DStv installation page sets out how the system fits together.

Questions we get asked

Every channel has gone at once. Does that mean the dish is broken?
Usually not. A total loss of signal is what one bad connector or one damaged cable looks like, and both are straightforward repairs. Dishes themselves rarely fail outright - they get moved, or the part on the end of the arm gives up.
Do you repair the decoder itself, or only the installation?
We work on the installation - dish, LNB, cabling, connectors, wall points - and on decoder faults that are hardware or setup related. Anything that needs the account changed is DStv's side, not ours.
Is there a guarantee on the repair?
Repair work carries a six-month guarantee against the same fault returning. If the same problem comes back within that period, we come back out for it.
The cable to my dish looks grey and cracked. Does the whole run have to be replaced?
Often yes, and it is usually the right call. A perished sheath means the cable has been letting moisture in along its length rather than at one point, so patching one section tends to buy a few months rather than a few years.
I had a new LNB fitted and it did not fix anything. What now?
That is a common story and it normally means the fault was never in the LNB. We start again from the decoder and work outwards, testing each stage, rather than assuming the last person's diagnosis was right and replacing the next part along.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za