DStv · Cape Town
Moving your DStv installation to a new address
A relocation is really two jobs with a van ride in between: a careful removal at the old house, and a fresh installation at the new one. The second half is the part that decides how well it works.

People tend to picture a relocation as unbolting a dish and bolting it back up somewhere else. The dish is the easy part. What actually takes the time is that the new address is a different site with different sight lines, a different wall, a different cable route and, often, a different number of rooms wanting a point.
Before anything comes off the wall
A few minutes at the old house saves an afternoon at the new one. The main question is what is actually yours to take. If the dish is on a complex wall, or fed from a communal system, it is probably not yours and removing it is not an option. In a rented house, the bracket usually stays put and only the hardware travels.
- Photograph the back of the decoder before you unplug anything, so the reconnection is not guesswork
- Check whether the dish and bracket belong to you, the landlord or the body corporate
- Keep the connectors and any fittings together rather than loose in a box
- Note which wall point feeds which room, if the house has more than one
- Leave the cable in the wall unless you have been asked to remove it
We would also rather take a dish down than have it taken down for you by a general removals team. A dish that arrives dented or with a bent arm has to be replaced, and the arm is the part that gets caught on a bakkie rail.
What is worth taking with you
The dish and the part on the arm are usually worth moving if they are in good condition - a dish is a reflector and age alone does not stop it working, provided it is not dented or distorted. Bring the decoder, obviously, and the smartcard with it.
Cable is a different story and it is normally not worth the effort. It has been cut to a specific length for the old house, it has been clipped, weathered and possibly stapled, and its connectors have spent years facing the sky. Reusing a tired run at a new address is how a fresh installation inherits an old fault. Brackets are borderline: removing one cleanly is often more damage to the wall than it is worth, and a new bracket suited to the new wall is the better answer anyway. Dish installation and mounting covers how that gets chosen.
Remounting and aiming at the new address
The new house is a fresh site survey and it deserves to be treated as one. Where the dish sat at the old address tells you nothing at all about where it should sit at the new one - different sight lines, different obstructions, a different wall construction and a different exposure to wind.
So the sequence at the new house is the same as any installation: find a position with a clear line of sight to the north-east, fix a bracket into something solid, mount the dish, then aim it on a meter and lock it down. It is aimed from scratch at the new address, because an aim set in one suburb is not transferable to another. Dish alignment explains what that process involves and why the check after locking down matters.
Cabling and points in the new house
A move is the cheapest opportunity you will ever get to sort out the cabling, because furniture is not yet against the walls and nobody has hung pictures. If the new house needs a point in a second bedroom or a study, doing it now costs a fraction of doing it in two years. Cabling and TV points sets out how the runs are planned, and if more than one room is going to be running at once, multiroom installations is the page for that.
Some houses already have satellite cabling from a previous owner. We test what is there before pulling anything new, because a sound existing run saves you money and saves the walls.
Take the smartcard out yourself
Keep the card on you rather than leaving it in a decoder that is going into a box with everything else. Cards get lost in moves more often than any other part of the system, and the card is the one item on the list that we cannot replace for you.
Bringing the decoder back up
Physically this is quick - reconnect, scan, confirm the signal at the decoder itself rather than trusting the meter outside, and let it settle before we leave. If there is a second decoder it gets tested on its own point rather than assumed to be working.
The account side is not ours. Anything to do with your details, your address on the account or your subscription sits with DStv, and no installer can do it on your behalf. If the decoder comes up at the new house showing a subscription message rather than a signal message, that is the reason - decoder and smartcard errors sets out which codes are account matters and which are ours.
Moving into a flat or a complex
If the new address is a block or a complex, the job changes shape entirely. Many blocks run a communal dish with a feed into each unit, which means your dish may have nowhere to go and no reason to be there - the work becomes cabling and setup on your side of the wall. The body corporate will also have a view on anything fixed to the outside of the building, and it is much better to know that before the dish is in the boot.
It is also the point at which the Smart LNB stops being a candidate. MultiChoice recommends it for single-unit dwellings and states plainly that it is not suitable for multiple unit dwellings, which is what a complex or a block of flats is. Installations in complexes and apartments covers how those jobs are planned, and the DStv installation hub gives the overview of the whole system.
The television is moving too
Screens get damaged in moves more often than anything else in the house, and a set that travelled flat in a bakkie sometimes arrives with a fault that was not there before. We do TV mounting at the new address, and TV repairs if something did not survive the trip.
Questions we get asked
Should I take the dish with me or leave it for the new owner?
Do I need to book the removal and the new installation separately?
Can the old cable be reused at the new house?
Is the address on my DStv account something you can change?
The new house already has a dish on the wall. Do I still need mine?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za