DStv · Cape Town
Realigning a satellite dish that has drifted
A dish that has moved does not look like a dish that has moved. It looks like a decoder problem, or a bad month of weather, or a system that is finally wearing out. This page is about telling the difference.

Alignment is a small-tolerance business. The adjustments that separate a strong lock from an intermittent one are slight enough that you would struggle to see them from the ground, which is why a dish can be badly out of aim and still look perfectly normal from the driveway. It is also why "it looks like it is pointing the right way" is not evidence of anything.
How to tell a dish has moved rather than broken
Failed parts and drifted aim produce different patterns, and the pattern is usually enough to tell them apart before anybody gets a ladder out.
- The picture degraded gradually over weeks or months rather than disappearing in one evening
- It breaks up in wind and comes back when the wind drops
- It went wrong immediately after a storm, roof work, painting or gutter cleaning
- It has become steadily less tolerant of rain than it used to be
- It works, but it has never really been solid since somebody was up there
A system that failed instantly and completely, with nothing gradual about it, is more likely to be a failed component or a damaged cable than a drifted aim - DStv repairs covers that side of the work. A system that has been fading is almost always a mounting or aiming problem.
What knocks a dish out of aim
Dishes do not drift on their own. Something always does it to them, and in Cape Town the list is short and reasonably predictable.
Wind, over time
The south-easter does not usually move a dish in one go. It works on the clamps season after season, and a bracket that was tightened adequately rather than properly gives up a fraction at a time. By the time it shows on screen, it has often been drifting for a year.
Something leaned against it
A ladder put against the arm during painting or gutter cleaning is the classic. So is anybody using the dish as a handhold while getting onto a roof, and so is a washing line, an aerial or a security light hung off the same bracket. The dish is not a structural fixture and it does not take kindly to being loaded.
A bracket working loose
Fixings corrode, especially near the sea, and masonry around an old fixing crumbles. The bracket does not have to fall off to ruin the installation - it only has to move a little under load, which is the point at which a dish becomes a system that fails in wind and recovers in calm weather. If that is what yours does, the mount is the suspect and dish installation and mounting explains what a proper fixing looks like.
Growth and building next door
A tree that was well below the dish five years ago is now in the path, or the neighbour has added a storey. This one is not an alignment fault at all, even though it presents identically, and it is worth knowing before you pay anyone to aim a dish that has nothing wrong with its aim.
What we actually do when we realign
Check the mount before touching the aim
There is no point aiming a dish that is sitting on a bracket which moves. If the fixings are loose or corroded, that is dealt with first, otherwise the alignment will be perfect on the day and gone by the next front.
Check the cable and the connectors
A corroded connector produces exactly the same symptoms as a dish out of aim, and it is far more common. Confirming the run is sound before starting to aim means we are not chasing a signal loss that has nothing to do with the dish.
Aim on a meter, in small increments
The dish is moved in small steps and read on a meter rather than judged by what the picture looks like. Small is the operative word - the difference between an adequate lock and a strong one is often less movement than you would expect.
Lock down, then check the aim again
Clamping a dish moves it. Anyone who tightens the bolts and packs up has left the job somewhere other than where they aimed it, so the reading is taken again once everything is tight and adjusted if it has shifted.
Test at the decoder and let it run
The meter outside and the decoder inside are not the same test. We confirm at the decoder, on the actual installation, and give it time to settle rather than reading a number and leaving.
That last pair of steps is where the difference between a realignment that lasts and one that fails in a month usually lies. If you are seeing an error code on screen rather than a degraded picture, signal problems and no-signal errors explains what the E48 family is telling you.
When realignment is not the answer
We will tell you if aiming is not going to fix your problem, and there are four common cases. An obstruction that has grown into the line of sight needs the dish moved to a new position, not aimed from the old one. A failed part on the arm needs replacing. Water in a connector needs the connector remade. And a bracket that is no longer sound needs remounting before anything else is worth doing.
In each of those, an alignment on its own buys you nothing, and we would rather say so on the phone than aim a dish that was never the problem. If the whole system is coming down anyway because you are moving house, DStv relocation is the more useful page.
What helps us before we arrive
Four things make an alignment call quicker, and none of them needs you to go near a ladder.
- A photograph of the dish taken from the ground, so we can see the mounting and the arm
- Roughly when the trouble started, and whether anything happened around then - a storm, painting, roof work, a tree cut back
- Whether it fails in wind, in rain, or in all weather equally
- The exact code on screen if there is one, including anything after a dash
OpenView dishes and alignment
OpenView also uses a dish pointing north-east, which is why a redundant DStv dish can often be reused rather than replaced. OpenView dish installation and alignment covers that side, and OpenView installation explains how the service differs.
Questions we get asked
How often does a dish need to be realigned?
The dish still looks like it is pointing the right way. Can it be out of aim?
My dish was realigned a few months ago and it has drifted again. Why?
Do you have to take the dish down to realign it?
Is it worth realigning an old dish, or should it be replaced?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za