Northern Suburbs · Goodwood
Putting an idle Goodwood dish back to work
Plenty of Goodwood houses carry a satellite dish that has not been connected to anything for years. OpenView is the service that can use it, and the wall bracket is usually the most valuable part of what is up there.

Goodwood is settled and it has been settled for a long time. Freestanding homes on regular plots, a scattering of flats, single-storey roofs that are easy to work on, and garden trees as the only real obstruction. It also means a lot of these houses have had a dish on the wall since the middle of the last decade, and a fair number of those dishes are no longer connected to anything at all.
That is the useful starting point for OpenView. It is a free-to-air satellite service with no monthly subscription fee, so once you own the equipment the service costs nothing each month. The decoder is the OV512, which also offers additional on-demand content over Wi-Fi. OpenView's own claim for the line-up is over 20 TV and radio channels, including SABC channels and e.tv - check the current list on their site if there is a specific channel your household will not do without, because that is the one thing worth settling before any money is spent.
The dish you stopped paying for is still worth something
OpenView connects to an existing satellite dish pointing north-east. A dish put up for a subscription is already pointing that way, which is why the single most useful thing we say on the phone to Goodwood callers is: leave it where it is until somebody has looked at it.
The bracket is the part that matters most. A mounting still fixed properly into solid brickwork, in a position with a clear path to the sky, represents most of the labour of an installation and none of it has to be repeated. After that it is the dish, the LNB, the connector at the arm and the cable run into the house, and each of those can be dealt with on its own rather than as part of a package.
We are an independent installer with no connection to OpenView or MultiChoice. There is nothing in it for us either way, which is why we would rather test what is on your wall than sell you hardware you already own.
What has to be checked before an idle dish is trusted
A dish that has stood unused is not automatically fine and it is not automatically scrap. Five things decide it, and none of them take long.
- The fixings, which rust from inside the hole outwards and can look sound from the ground while holding almost nothing
- The connector at the arm, which is the highest and most exposed joint in the run and the one that most often lets water in
- The LNB, which gets tested rather than assumed - it either performs or it is replaced
- The cable and its ends, where sun-perished sheath and green, crumbling terminations are the usual finds
- The aim itself, which may have drifted while nobody was watching the picture it was feeding
Line of sight gets the same treatment. Goodwood gardens have had decades to fill in, and a dish put up when a tree was shoulder height may now be looking through the top of it. That is not something aiming can fix - the dish has to move to a position that sees past it. Dish installation and alignment for OpenView covers both the recommissioning and the cases where the position has to change.
From a cancelled subscription to the first channel scan
We work out what survives
Dish, bracket, cable through the wall, plate behind the television. Everything on that list that is still sound is work nobody has to pay for twice, and it is also when we establish whether the path to the north-east is still open.
The joint at the arm gets remade
On an installation that has stood for years this is almost always necessary, and it is quick. A properly made and weatherproofed connector is the difference between a picture that shrugs off winter and one that starts objecting to rain in June.
The cable is tested before it is trusted
An existing run saves a genuinely useful amount of work if it is sound. Old aerial cable pressed into satellite service is the common find, and it produces a picture that looks fine on a still evening and breaks up on a windy one.
The OV512 goes on and the channels are scanned
The decoder connects to the television, the setup runs, and the scan fills the list. We watch the signal reading rather than the number of channels, then leave it running a while before packing up. Decoder installation and setup covers this part in detail, including the Wi-Fi side for on-demand content.
Where there is nothing to reuse
Not every job here starts with hardware on the wall. Previous owners take dishes with them, some houses never had one, and in the older blocks of flats the outside of the building is not yours to drill in the first place. Many of those blocks run a communal dish with a feed to each unit, which means the work is on your side of the wall and no new dish is needed - what may be attached to the building itself is the body corporate's decision.
Where a new dish does go up, the position is chosen for the next ten years rather than for today, because the trees that are a nuisance now were not a nuisance when the last dish went up. And if the subscription is staying after all and it is the existing system that needs attention, DStv installation and repairs in Goodwood covers that work instead.
The dish is fine and the picture still looks wrong
Once the feed is proven, anything left is the television. Goodwood households tend to keep sets in service for a long time, and a dull picture, a black screen with sound, or a set that will not start are all repairs rather than replacements - TV repairs in Goodwood covers what we can do on site.
Questions we get asked in Goodwood
Does the old dish have to be re-aimed, or does it stay exactly as it is?
Can the DStv cable and wall point in the house be reused too?
We still have the old decoder in the cupboard. Is it any use for OpenView?
What if the old dish turns out to be past saving?
Do we have to tell anyone we are moving to OpenView?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za