Advice
Keeping track of the sports channels without memorising numbers
A decoder does not know what channels exist. It knows what was on a list the last time it looked, and that list ages. Almost every missing-channel complaint we hear comes back to that one fact.

This page is not a list of sports channels and their numbers. We have deliberately not published one, because numbers move, line-ups change and a page that fixes them in print is wrong within a year or two. What we can give you is the thing that stays true: how the decoder decides what to show you, and what to do when it stops showing you something it used to.
If you are trying to find a specific match rather than manage the channel list, our article on finding a fixture and making sure the picture holds is the other half of this and takes a different route.
The decoder holds a list, and the list goes out of date
When a decoder is installed it scans what is being broadcast and builds a service list: what exists, what it is called and where to find it. From then on the box works from that list. It does not go and check every morning.
So when a channel is added, moved or discontinued, the decoder does not automatically know. You press the number you have always pressed and something else appears, or nothing does. The channel has not been taken away from you personally, and your dish has not failed. The list in the box has simply fallen behind what is actually being broadcast.
That is the single most useful idea on this page, because it changes the first thing you do. The instinct is to phone somebody. The better move is to give the decoder a chance to rebuild its own list.
Build a shortlist instead of memorising numbers
Households that struggle most with channel changes are the ones where somebody has memorised a number. Households that barely notice are the ones using a shortlist, because a shortlist follows the channel rather than the number.
DStv's own advice for a channel that has been discontinued includes pressing the down arrow on the remote to view available channels, or pressing TV and selecting My Channels. That second one is the shortlist, and it is worth setting up properly rather than ignoring.
On DStv's online guide there is an equivalent: use the star next to a channel logo to favourite it, then use the download button to pull a schedule, choosing how many days to include. Doing that once at the start of a season is more useful than checking a guide repeatedly during one.
- Put the channels you actually watch into the decoder's own shortlist
- Favourite the same ones on DStv's online guide, which is easier to use on a phone
- Rebuild both after any change, rather than patching one number at a time
- Teach whoever else uses the remote where the shortlist is, so nobody reverts to typing numbers
The codes that mean a channel has moved or gone
DStv publishes its full error list on its own site and it is the only list worth checking against. Several codes describe channel and service problems specifically, and they are worth separating from the signal ones.
| Code | DStv's own description | What it usually means for you |
|---|---|---|
| E18 | Channel is not available | The service is not there to be shown right now |
| E37 | Invalid channel number | The number you pressed does not match anything on the decoder's list |
| E38 | Service is not available | DStv's detail page attributes this one to a connection problem, not a channel problem |
| E39 | Service is not available | Same wording as E38 on the official list |
| E50 | No Services Available | Nothing at all in the list, which is a bigger problem than one channel |
| E72 | Rescan in progress | The decoder is rebuilding its list. Leave it to finish |
The one to understand properly is the invalid channel number code. DStv's own detail page for it says the error indicates that the channel you are trying to access may no longer be available or has been terminated, and its first instruction is to reboot and rescan the decoder, which it says will update the service list and ensure you have access to all currently available channels. That is a channel-list fix in DStv's own words.
The service-not-available code is a different animal despite the similar-sounding name. DStv's detail page for it says the error typically occurs due to a connection issue where the decoder is unable to receive a signal, and that this can be due to loose cable connections or misalignment of the satellite dish. So one of these sends you to the channel list and the other sends you to the installation. Getting that the wrong way round is how people spend an afternoon rescanning a decoder whose dish has moved.
Rescanning: what it does, and what we will not claim it does
A rescan makes the decoder look at what is actually being broadcast and rebuild its service list from that. DStv's own wording for the invalid-channel code describes exactly that outcome, so it is a reasonable first response to a channel that has vanished.
It is not a general-purpose fix. A rescan does nothing for a dish that has drifted, a corroded connector or a failing LNB, because those stop the signal arriving in the first place and there is nothing for the decoder to scan. If the picture is breaking up as well as missing channels, deal with the signal first: our article on the checks worth doing before you phone anyone is the ten-minute version of that.
One thing we are deliberately not going to tell you is whether a rescan preserves recordings, favourites or settings on your particular decoder. We have not verified it and it is not the sort of thing to guess about on somebody else's behalf. If you have recordings you cannot afford to lose, check DStv's own help before you start rather than after.
Missing channels that are not channel problems at all
Before assuming the list is out of date, run two checks that cost nothing and regularly point somewhere else entirely.
First, look at how much of the house is affected. If a second decoder shows the same channel perfectly, the fault is downstream of the split and belongs to that room's cable, plate or box rather than to the channel list. If every decoder in the house is missing the same thing at the same moment, that is a stronger case for a list or a broadcast problem. On a linked pair the two boxes depend on each other, so a problem on one can present on the other, which is covered on our XtraView page.
Second, check whether it is one channel or a group of them. Signal faults do not pick favourites: a weak or intermittent signal takes out whole blocks of channels together, typically the ones carried on the same part of the satellite feed, and it does it inconsistently rather than permanently. One channel gone and everything else immaculate is almost never a dish problem.
And some messages have nothing to do with hardware at all. Codes that describe an account state cannot be cleared by anybody on your roof, however long they spend up there. Our page on decoder problems and error codes separates the ones a technician can act on from the ones only DStv can.
Where streaming sits next to the decoder
It is worth knowing that the decoder is not the only route. DStv describes DStv Stream as the brand and name for its streaming-only subscriptions, and says it allows customers to take a subscription and watch content anywhere without the need for a decoder. Separately, DStv's own advice when signal is lost to weather points customers at DStv Stream, BoxOffice and Showmax while they wait for it to return.
We are not going to say what any of that costs, what it carries or how it compares, because none of that was verified and all of it changes. The useful point for this page is structural: a channel missing from a decoder's list is a decoder problem, and there is usually another way to see the same thing while you sort the box out. That is also true in reverse, and a household whose streaming is unreliable while the decoder is fine has a network problem rather than a satellite one, which our article on streaming apps that have stopped behaving works through.
When it is the installation rather than the list
Whole groups of channels going, a picture that breaks up in wind, or a decoder that has stopped seeing anything at all are signal faults and no amount of rescanning will move them. See DStv signal problems or dish alignment. We work across Cape Town from Thornton, including Somerset West and Goodwood.
Questions we get asked
A channel I watch every week has vanished. Is the decoder broken?
How often is it worth rescanning the decoder?
Does a rescan lose my recordings or my settings?
Why do channel numbers change at all?
Can a technician get a missing channel back for me?
Is there any way to know in advance that a channel is going away?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za