DStv · Cape Town

Smart LNB installation and replacement

The Smart LNB is the part that lets one cable do the work of several. It is the right answer in most houses and, by MultiChoice's own statement, the wrong one in complexes and apartment blocks.

Close-up of an LNB mounted on the arm of a satellite dish

The LNB sits on the arm in front of the dish and is the first piece of electronics in the chain. Everything the decoder eventually shows you passes through it. A Smart LNB is a particular type, and because it comes up in almost every quote for a modern installation, it is worth understanding what it actually does before deciding if you need one.

What DStv says a Smart LNB is

We would rather quote the manufacturer than paraphrase them. MultiChoice's own description is that "the DStv Smart LNB combines the features of a DStv Switch into a single UniCable LNB and offers a single cable solution for distribution of multiple satellite signals".

Two things follow from that sentence. The first is that a separate switch box, and the cabling that went with it, is no longer needed in the installation. The second is the practical one people care about: one cable can distribute multiple satellite signals, so a house that would once have needed several parallel runs from the dish can be fed on a single run. Fewer cables through the roof, fewer connectors exposed to the weather, fewer things to fail.

Where MultiChoice says it belongs

MultiChoice recommends the Smart LNB for all DStv Explora and most XtraView installations in single-unit dwellings — a freestanding house, in other words, where the dish serves one household.

It also states plainly that the Smart LNB is not suitable for Multiple Unit Dwellings, meaning complexes and apartments. That is not our opinion or a preference of ours; it is stated on DStv's own help page. It matters because a fair number of people in blocks are told they need one, and it is the sort of thing worth knowing before the conversation starts. If you live in a complex, read what actually applies in complexes and apartments instead.

The short version

Freestanding house with an Explora, or an XtraView pair: the Smart LNB is what MultiChoice recommends.

  • Complex, apartment block or any multiple unit dwelling: MultiChoice says it is not suitable
  • In those buildings the distribution system, not the LNB, is usually the thing that decides what is possible

LMX500 and LMX501

Two models are named officially, and they differ in how many user bands and outputs they carry. User bands are what limits how many things the installation can feed at once, so this is the specification that actually decides what a house can run.

ModelUser bandsUniCable outputsUniversal outputs
LMX5002442
LMX5013031

The LMX501 carries more user bands but fewer outputs; the LMX500 has fewer bands and more outputs, including two Universal ones. Which suits a property depends on how the installation is laid out and what else has to be fed. We work that out on site rather than assuming, because the wrong choice is only discovered when the house is fully cabled and something will not tune.

E74 and E75 — LNB overload

DStv's error code list gives E74 as LNB1 overload and E75 as LNB2 overload. Customers usually read the word overload and assume the LNB has burned out and needs replacing. Sometimes it has. More often the LNB is reporting a problem that is not its own fault.

An overload code generally points at a short somewhere in the cable or a connector rather than at the dish itself. A centre conductor whisker touching the braid inside an F-connector, a cable crushed by a staple, a wall plate wired in a hurry, or an outdoor joint that has taken in water will all produce it. That is why we check the cabling before we quote anybody for a new LNB — replacing the LNB while leaving the short in place gives you a new part and the same error code.

The distinction is worth holding onto: E48 means the decoder is searching for signal, which can be the dish, the cable, the LNB or simply weather, while E74 and E75 point at the electrical side of the installation. Our page on DStv signal problems covers the searching-for-signal family, and cabling and TV points covers the connector faults that cause overload codes.

Signs we see before an LNB is actually finished

An LNB rarely fails cleanly. It degrades, and the complaints that come with it are the ones people put up with for months before phoning anybody: a picture that breaks up on one part of the viewing choice but not another, a decoder that takes longer and longer to find signal after a power cut, or an installation that works perfectly in the morning and struggles by mid-afternoon when the sun has been on the dish arm for hours. None of those on their own prove the LNB is the culprit, which is exactly why we test rather than assume.

Fitting or replacing one

  1. Confirm the diagnosis

    We test before we replace. If the fault is a short in the run or a corroded connector, changing the LNB fixes nothing and costs you money for no result.

  2. Check what the property needs

    How many decoders, how many points, and whether more are planned. A Smart LNB fitted for the installation you will have in two years is cheaper than one fitted for the installation you have today.

  3. Swap and re-terminate

    The LNB comes off the arm, the new one goes on in the correct orientation, and the connection to it is made up fresh and sealed. We do not reuse a connector that has been outside for years just because it still grips.

  4. Re-check alignment

    Any work on the LNB holder is a chance to disturb the dish, so we confirm the aim afterwards rather than trusting it. That process is described on our dish alignment page.

  5. Test every point, not just one

    On a multi-point installation we confirm all of them. A Smart LNB feeding several rooms can look perfect on the lounge decoder while a bedroom point sits half-connected.

The LNB lives outside, permanently, in whatever Cape Town is doing. On the coast the salt gets into everything eventually, so an LNB in Sea Point has a harder life than one in the Northern Suburbs. Sealing is not a finishing touch on a job like this; it is most of the reason the job lasts.

Questions we get asked

What is a Smart LNB in plain language?
DStv describes it as combining the features of a DStv Switch into a single UniCable LNB, offering a single cable solution for distributing multiple satellite signals. In practice it means one cable from the dish can feed what used to need several, so there is less cabling and fewer joints to go wrong.
I live in a complex and was told I need a Smart LNB. Is that right?
MultiChoice states the Smart LNB is not suitable for Multiple Unit Dwellings, which includes complexes and apartments. If somebody has quoted you for one in a block, it is worth asking what the building's existing distribution system is and why a Smart LNB is being proposed.
LMX500 or LMX501 — which one goes on my dish?
The LMX500 has 24 user bands with 4 UniCable outputs and 2 Universal outputs. The LMX501 has 30 user bands with 3 UniCable outputs and 1 Universal output. Which one suits your property depends on how many points the installation has to feed and how it is laid out.
My decoder shows E74. Does the LNB have to be replaced?
Not automatically. E74 is DStv's code for LNB1 overload, and an overload usually points at a short in a cable or a connector rather than a failed LNB. We test the run first, because replacing the LNB without finding the short leaves you with a new part and the same error.
How long does an LNB last outside?
There is no fixed number, and anyone who gives you one is guessing. What we can say is that exposure decides it — salt air on the coast and constant wind movement at the connector shorten the life considerably, while a sealed connection on a sheltered wall lasts far longer.
Can a Smart LNB be fitted to my existing dish?
In most cases yes, provided the dish is sound, correctly aimed and mounted on something solid. The LNB is a separate part on the arm, so it can be changed without replacing the dish itself. We check the mounting and the aim at the same time.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za