Northern Suburbs · Parow

OpenView in Parow, in a house or in one flat of a block

Parow work splits in two. In a house the installation is ours from the wall outwards. In a block where flats have been done one at a time over the years, the first job is establishing which of the dishes up there is yours.

Several satellite dishes of different ages fixed to the side wall of a block of flats

OpenView is free-to-air satellite television with no monthly subscription fee. You buy the equipment and the installation, and after that the service costs nothing each month. The decoder is the OV512, which also offers on-demand content over Wi-Fi, and OpenView's own description of the line-up is over 20 TV and radio channels, including SABC channels and e.tv. It connects to an existing satellite dish pointing north-east, which is why an idle dish left over from a subscription is worth looking at before it is written off.

Parow is established and mixed. Older freestanding homes and semis sit near blocks of flats, the sky is generally clear apart from the taller buildings, and the wind and the summer heat get at everything fixed to the outside of a wall. Households here also keep televisions in service for a long time, which matters at the end of an installation more than at the start.

Which dish on the building is yours

Blocks around here tend to have been done flat by flat rather than all at once, so one wall or a row of balconies can carry several dishes of different ages, put up by different people, some of them feeding units whose occupants left years ago. Nothing gets disconnected on a guess. The cable is what identifies a dish, so we work outwards from the plate inside your flat and follow the run, rather than picking the dish that looks like it ought to be yours.

A dish left behind by a previous tenant is often perfectly usable and worth testing before anything is bought. What decides it is the short list that decides it anywhere: the mounting, the connector at the arm, the LNB and the cable. Anything fixed to the outside of the building or standing on common property is the body corporate's to rule on, and that is a question worth asking before the day rather than on it.

Where a block runs one communal dish with a feed to every unit, the work in your flat is short and entirely indoors, and no new hardware goes onto the building at all.

Houses: what is already on the wall

On a house the assessment starts with the bracket. A mounting still properly fixed into solid brickwork, in a position with a clear path to the sky, represents most of the labour of an installation and none of that has to be repeated. After that the dish, the LNB, the connector and the cable run into the house are each judged separately, so a single perished part does not condemn the whole installation.

The aim gets checked and locked down again on a meter even when the dish has not been touched, because brackets shift over the years while looking perfectly normal from the driveway. Dish installation and alignment covers that work. Households keeping a subscription on the main television and putting an OV512 on a second set are in a slightly different position, since the question becomes what the existing LNB and cabling can already carry: DStv installation and repairs in Parow covers that half of the property.

Wind on the bracket, sun on the cable

Two kinds of ageing show up on an installation that has stood here for years, and they produce different complaints. Wind is mechanical. It works on the fixings and the arm, and the sign of it is a picture that breaks up while the wind is blowing and is fine again by evening. Heat is chemical. Sun-perished sheath cracks, the boot over the connector splits, water gets into the joint and the picture declines slowly over seasons rather than failing on a given day.

Both are worth describing on the phone in those terms, because they send us up the ladder with different intentions. Re-aiming a dish that is flexing holds until the next windy week; resealing a joint on a dish that is moving achieves nothing. No signal and weak signal on OpenView works through the symptoms and what each one usually turns out to be.

The set the decoder has to plug into

Plenty of televisions in Parow have been in service a long time, and that is not an obstacle to OpenView by itself. The OV512 is an external box, so the television only has to provide a screen and a free input. What we would rather do is look at the back of your set on the day than promise over the phone that a particular lead will fit, because the sockets on an older television are the one thing a description never gets right.

If the set itself has failed, no amount of work outside will move it. A screen that stays black while the sound plays, a set that takes several attempts to start, or lines through the picture are all faults on the television side of the HDMI cable.

Afterwards, and what maintenance actually looks like

There is nothing to renew and no account behind an OpenView installation, so the list of things that can go wrong later is short and physical: the dish, the cable, a connector, the LNB or the decoder. Occasionally a channel list changes and the decoder needs a rescan, which is a menu job rather than a callout. The on-demand side needs your Wi-Fi to reach wherever the box sits; the satellite channels do not need the internet at all.

When a picture does go missing, the useful information is what changed and when. OpenView decoder problems covers the box itself, and decoder installation and setup covers what we do at the television when a new one goes in.

Questions we get asked in Parow

There are several dishes on our block and nobody knows which is which. How do you work that out?
From the inside out. We start at the wall plate in your flat, test what is coming in on it and trace the run, rather than judging by which dish is nearest your window. Where the cabling was done unit by unit over the years that is the only reliable way, and it avoids the classic mistake of disconnecting a neighbour's feed.
Is a dish on a balcony as good as one on the roof?
It can be exactly as good. What matters is a clear path to the north-east from where the dish sits and a fixing into something that will hold it, not the height. A balcony often gives both, along with a much easier cable route. The catch is that a balcony rail or the outside wall may count as common property, so the body corporate decides what may be fixed to it.
Do the channels ever need re-scanning after the installation?
Occasionally, when the line-up changes on OpenView's side. It is a scan from the decoder's own menu and takes a few minutes, and we show you where it is before we leave so it is not a reason to phone anybody. A scan that finds nothing at all is a different matter and points at the feed rather than the list.
The wall point is in the lounge and we want the decoder in the bedroom. What does that take?
A cable, because the satellite feed decides where the decoder can sit. Either the run gets extended to a new point in the bedroom or a second point is added, and in a flat that is a question of what route exists between the two rooms without lifting the whole place apart. It is worth mentioning when you book so the right materials are on the van.
Our picture goes at the hottest part of the afternoon and is fine by evening. What causes that?
That pattern usually points at something marginal that changes as it warms up, rather than at an aim that is wrong. A corroded joint, a perished connector or a decoder cooking in a closed cabinet all behave that way. It gets diagnosed by testing at the dish and at the decoder rather than by guessing, but it is a strong clue and worth mentioning when you call.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za