Atlantic Seaboard · Sea Point

DStv installation and repairs in Sea Point

In Sea Point most satellite work happens inside a block rather than on a house, and the first job is usually establishing whether the fault sits in your flat at all.

Communal satellite dishes and cabling on the roof of a Sea Point apartment block

Sea Point runs in a narrow strip between Signal Hill and the Atlantic, and it is built almost entirely upwards. That one fact shapes every satellite job here. Most flats are fed from a communal dish on the roof through a distribution system in the risers, terminating at a wall point in the lounge. The part you can see and touch is the small end of a system that mostly belongs to the building.

We work on both ends of it. What we do first is work out which end has failed, because that decides whether this is a small job on your side of the wall or something the trustees have to authorise and pay for.

Your flat, or the building's system

The quickest test costs nothing. Ask the flat next door and the one above whether they have a picture. If a whole stack of units is dark, the fault is in shared equipment — a splitter in a service cupboard, an amplifier that has quietly died, a connector in a riser that has been damp for a decade — and that is a body corporate matter rather than yours. If it is only your unit, the fault is on your side of the wall plate and we can deal with it directly.

On your side of the plate the usual causes are dull and cheap: a flex walked on behind the television unit, a connector that spins freely because it was never tightened, a wall point damaged when somebody dragged a cabinet out. Our page on installations in complexes and apartments goes through the ownership question properly, and it is worth ten minutes before you pay anyone to attend.

Four things worth checking before you book anyone in a block

Between them these narrow the fault down to a floor, and sometimes to a plug.

  • Whether the neighbouring flats have a picture at this moment
  • Whether the error shows in clear weather, or only during a front — DStv attributes its E48-32 code to stormy weather and rain
  • Whether anything was moved or replugged behind the television recently
  • Whether the caretaker already knows about a fault in the building

Line of sight between tall blocks

Where a Sea Point building does allow an individual dish, the obstruction is almost never a tree. It is the block in front of you. A dish needs a clear view of the sky to the north-east, and in a street of buildings of different ages and heights that view can exist on the sixth floor and not on the third. Two flats in one building, one above the other, genuinely can have different answers.

So we check the position before anything is bought or drilled. If there is no line of sight from any spot your scheme would permit, we say so on the first visit rather than sell you an installation that will never lock on. Where a position does exist it is often a designated roof spot rather than a balcony, which brings the building's rules straight back into the conversation.

Salt, wind and the roof end of the system

Sea Point takes salt air most days of the year and a hard south-easter for a good part of it. The dish tolerates that reasonably well. The connectors do not. Moisture and salt work into a fitting at the dish end, corrosion starts under the boot, and the loss builds slowly enough that people live with it for a season — pixelation on bad nights, then breaking up in wind, then a decoder that spends the evening searching. Signal problems and the E48 codes sets out how we separate that from genuine weather.

On a communal system that corrosion is in shared equipment on an exposed roof, which is why older blocks tend to develop faults across several flats at once rather than one at a time. It is also why, when trustees ask, we would rather look at a building's distribution as a whole than chase the same fault flat by flat for a year.

Getting into the building

The awkward part of Sea Point work is access, not aerials. Buildings sign contractors in, lifts are booked for moves at set hours, roof keys live with one caretaker who is not always on site, and parking on the main road is what it is. None of that causes a problem if we know when you book. Arriving to a locked roof wastes everybody's morning.

For anything fixed to common property — a bracket on a facade, a cable down the outside, a hole through a wall that is not yours — we want the body corporate's consent in writing before we start. That protects you more than it protects us. An installation put up without permission comes down again at the owner's expense.

Decoders, extra points and moving in

Not everything in a flat is about the dish. Decoders fail on their own, smartcard messages have nothing to do with signal, and adding a point in a bedroom is ordinary work once we know where the existing run goes. Decoder and smartcard errors covers the codes that are not signal-related, which is most of them.

One thing to know before somebody quotes you. MultiChoice recommends the DStv Smart LNB for single-unit dwellings and states plainly that it is not suitable for multiple unit dwellings, which is exactly what a Sea Point block is. If a Smart LNB has been proposed for your flat, ask what problem it is meant to solve. On a building fed from a communal dish, it is not the answer.

Questions we get asked in Sea Point

Do I need the body corporate's permission for work inside my own flat?
Normally not. Work on your decoder, your flex and your wall point is inside your section and does not involve common property. Permission becomes necessary the moment something is fixed to an external wall, a balcony structure or the roof, because those belong to the scheme rather than to you.
The building has a communal dish. Do I still need my own decoder?
Yes. The communal system delivers signal to a point in your flat; the decoder and the subscription are yours. That split is also why a fault can be entirely in the building while the equipment in your lounge is perfectly healthy.
My neighbour's picture is fine and mine is not. What does that tell you?
That the shared part of the system is probably working and the fault is between your wall point and your decoder. That is good news, because it is the half we can fix without involving anyone else. We test from the plate outwards to find where the signal stops.
Can a dish on a Sea Point balcony see past the block in front?
Sometimes, and it depends entirely on which floor you are on and what is opposite. The view has to reach the north-east sky without a building in the way. We check from the actual balcony before anything is ordered, because the answer changes between floors of the same block.
Does salt air damage the satellite equipment on the roof?
It reaches the connectors first. Corroded fittings at the dish end are the most common physical fault we find on this part of the Atlantic Seaboard, and they degrade the signal gradually rather than killing it outright. Sealing done properly at installation is what buys the years.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za