Cape Flats · Bishop Lavis

Free-to-air satellite television in Bishop Lavis

In Bishop Lavis, OpenView is what most households we work for are actually after: a television service you buy once, with no subscription behind it. This page is about getting it in properly the first time.

Installer fixing a satellite dish bracket to the wall of a single-storey house

Bishop Lavis is an established residential suburb on the airport side of the Flats, mostly freestanding houses and semis on compact plots with single-storey roofs. Around here OpenView is the more common choice than a monthly satellite subscription, and that is worth stating plainly rather than tiptoeing around.

OpenView is a free-to-air satellite service. There is no monthly subscription fee once you own the equipment, the decoder is the OV512, and it works off a dish pointing north-east. We install and repair it as an independent business with no connection to OpenView or to MultiChoice.

The normal choice here, not the cheap one

A household that decides not to carry a monthly bill for television has made a sound decision, not a reluctant one. The money goes in once, at the start, and then the service costs nothing further. Over a few years that is a substantial difference, and it is the same picture on the same television either way.

What you get is described by OpenView as over 20 TV and radio channels, including SABC channels and e.tv, and the OV512 adds on-demand content over Wi-Fi if you put it on your home network. It is a smaller line-up than a paid package and we will not pretend otherwise. For a lot of households that difference is theoretical, because it does not touch what they actually watch, and the honest way to find out is to compare the current line-up on OpenView's own site against your own evening.

Starting where there is no dish at all

Not every house here has a redundant satellite dish on the wall to work from, so a fair number of our Bishop Lavis installations start from nothing. That is a normal job rather than a complicated one, and it runs in a set order.

  1. Find a position with a clear view to the north-east

    This is decided by the sky and the neighbouring roofs rather than by which wall looks neatest. On a single-storey house on a compact plot, the height of the bracket often matters more than the wall it goes on.

  2. Fix a bracket into something that will hold it

    The bracket is the part that decides how long the installation lasts. It goes into sound brickwork with the right fixings, not into plaster and not into a fascia board, because on open ground the wind will find anything that was not done properly.

  3. Run and terminate the cable

    The run goes on a protected route, the wall entry is sealed with a fall to the outside and there is a drip loop before it enters. Connectors are made off tightly and sealed, because they are where nearly every long-term fault begins.

  4. Aim on a meter and scan the OV512 in

    The aim is set on a signal meter rather than by eye, then locked down. The decoder goes on the television, the channels are scanned, and we check the reading at the decoder before we pack up and leave it running a while.

Decoder installation and setup covers the indoor half of that in more detail, including what to do about a television with older sockets, and dish installation and alignment covers the outdoor half.

What has to hold for the next few years

There is wind and dust across the open ground here, and both work slowly on an installation. Wind loads the bracket and the cable clips season after season. Dust gets into any connector that was not made off tightly and holds moisture against the metal, which is where corrosion starts.

Neither of those breaks a system on the day it goes in. They decide whether it is still working in five years without anybody having to think about it, which is why the boring parts of the job are the parts worth paying attention to. A properly fixed bracket and four sealed connectors are what separate an installation you forget about from one you phone about every winter.

If the picture goes, with no subscription to blame

This is quietly one of the better things about free-to-air. When a subscription picture disappears, there are two families of possible cause: the installation, or the account. With OpenView the second family does not exist, so a missing picture is always physical, and the search runs down a short list: the dish, the cable, a connector, the LNB, the decoder.

Before phoning anyone, two things are worth doing yourself. Check the connector at the back of the decoder is finger tight and does not spin freely, and switch the decoder off at the wall rather than on the remote, wait a full ten seconds and start it cold. If neither helps, no signal and weak signal on OpenView works through what the pattern of the fault is telling you, and our main OpenView page explains how the whole system fits together. For the same work in the next suburb, see OpenView in Elsies River.

Questions we get asked in Bishop Lavis

We have never had satellite here. What actually goes up?
A dish on a bracket with a clear view to the north-east, a cable from it into the house, and the OV512 decoder on the television. That is the whole system. Where there is no existing dish, all of it is new, and it is still a single visit rather than a project.
Is OpenView a step down from a paid subscription?
It is a different service, not a lesser version of the same one, and for a lot of households it covers what they watch. The line-up is smaller, which is the trade for having no monthly bill. Compare the current channel list against what your household actually puts on in the evenings and you will have your answer.
Do we still get SABC and e.tv?
Yes. OpenView's own description of the service is over 20 TV and radio channels, and it names SABC channels and e.tv among them. We do not publish an exact count here because line-ups change and a fixed number on a web page goes stale.
Is there a contract to sign?
Not for the service. OpenView is free to air, so there is no monthly subscription fee once you own the equipment and nothing to sign up to. You are paying us for hardware and for the work of installing it, and that is where it ends.
The wind here is hard on everything. Will the dish stay where you put it?
That depends entirely on the bracket and the fixings, which is why we would rather spend the extra twenty minutes getting them into sound brickwork. A dish that moves gives you a picture that comes and goes, and loose fixings work themselves looser rather than settling.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za