Advice
The DStv is off and the kids are not impressed: a practical plan
There are two problems here and they need separating. One is a technical fault that will take as long as it takes. The other is the next three hours, and that one you can solve immediately.

A picture that disappears at half past six on a school night is a particular kind of household emergency. The temptation is to spend an hour on the roof in fading light with three children asking whether it is fixed yet. That is the worst version of the evening for everybody.
So do it in two parts. Give the fault ten focused minutes, because a real share of these clear themselves in that time. Then stop, put it down, and deal with the evening. The dish will still be there tomorrow in daylight.
Ten minutes on the fault, then put it down
The checks worth doing are cheap, safe and indoors. Anything that involves a ladder is a daylight job and not one to attempt with an audience.
Read the code and write it down exactly
Including anything after a hyphen, because the suffix changes the meaning. Take a photograph of the screen if it is easier. A code half-remembered as "something forty-eight" loses the most useful part of the message.
Check the cable at the back of the decoder
DStv's own first step for its weather code is to check that the cables from the satellite dish are connected to the decoder properly. Take hold of the connector and confirm it is finger-tight on its threaded barrel rather than resting in the socket. Do the same at the wall plate.
Switch off at the wall plug for at least ten seconds
At the wall, not on the remote and not on standby. DStv specifies at least ten seconds, so count them rather than flicking the switch twice. Then leave the decoder alone for a few minutes while it starts and searches. Interrupting it means starting again.
Check another decoder if the house has one
If a second room is watching happily, the fault is downstream of the split and the dish is almost certainly fine. If every decoder in the house shows the same thing at the same moment, the problem is outside. This takes thirty seconds and it is the single most useful thing you can tell a technician.
Then stop
If it has not come back, it is not coming back tonight without work that should happen in daylight. Note what you found, and move on to the part of the evening you can actually control.
What the screen is telling you, in one line
You do not need to memorise DStv's error list, but two distinctions are worth knowing because they decide who you phone.
E48 is DStv's code for Searching for Signal. E48-32 is their separate code for Weather, which they attribute to stormy weather and rain. If a front is passing over Cape Town, that second one usually resolves itself when the weather does, and there is nothing useful to do outdoors in the meantime. Our article on what rain actually does to a satellite signal explains why it comes back on its own.
The other distinction is between signal codes and subscription codes. Some messages describe an account state rather than anything physical, and no technician can clear them from your roof. If that is what you are looking at, the conversation is with DStv rather than with an installer. Our article on the checks worth doing before you phone anyone sorts the codes into those two boxes properly.
The evening does not actually depend on the decoder
Here is the part people forget in the moment. The decoder is one of several ways a picture reaches that room, and the others are unaffected by whatever is happening on the dish.
- Anything already recorded onto a PVR is sitting on the drive in front of you rather than arriving down the cable, so a signal fault does not usually touch it.
- Streaming apps on the television, a console, a phone or a tablet run over the internet and know nothing about the satellite.
- DStv's own advice during a weather outage names DStv Stream, BoxOffice and Showmax as alternatives while waiting for the signal to return, so that is DStv's suggestion rather than ours.
- Anything downloaded to a tablet in advance works with no connection at all.
The practical move on the night is to switch the television to its own apps rather than the decoder input, which is a button on the television's remote and not the decoder's. Households with a soundbar or a switch in the chain sometimes struggle with this under pressure, which is one small argument for labelling the inputs on a calm day. Our guide to connecting a decoder to a smart TV covers how to name them so nobody has to guess.
If the apps are also misbehaving, that is a separate fault with a separate cause and it is worth knowing which. A television that cannot reach its own apps has a network or platform problem, not a satellite one, and the article on streaming apps that have stopped behaving works through that in order.
Downloads are something to do before you need them
The most useful thing on this page is not for tonight. It is for the next time, which there will be, because satellite television in a windy coastal city goes off occasionally even when everything is installed properly.
Keep a few hours of downloaded content on a tablet at all times, refreshed when you think of it. Downloads work with no internet and no satellite, which makes them the only option that survives both a signal fault and a fibre outage. Set them to download on Wi-Fi only so nobody discovers a mobile data bill afterwards.
Two other things are worth having ready. A drawer with a pack of cards, a couple of board games and a torch in it does more work on a bad evening than any amount of technology. And a written note on the inside of that drawer with the household's decoder details on it, so that whoever ends up making the phone call is not hunting for a smartcard number in the dark.
When the power is off as well
Load-shedding changes the problem, because now nothing is on. Tablets and phones hold a charge and are the obvious answer, which is why keeping them charged during the hours when the power is on matters more than it seems.
There is also a technical point worth knowing. Repeated hard power cuts are hard on a decoder's power supply, and a box that has started behaving oddly after a bad month of load-shedding is not a coincidence. A decoder that will not start, restarts itself or takes progressively longer to come up is showing the signature of a supply on its way out, which is covered on our decoder faults page. That is a repair rather than a signal problem, and it is worth separating from anything happening on the dish.
Whether to phone tonight or in the morning
If the code is a subscription state, phone DStv, and the time of day makes no difference to what needs to happen. If it is a signal code and the reset has not held, the work involves somebody with a meter and a ladder, and that is daylight work.
What is worth doing tonight is writing down the six things that make the first visit productive: the exact code with its suffix, whether all decoders are affected or one, when it last worked, whether it fails only in wind or rain, whether anything has been done to the roof or the trees recently, and what happened after the power cycle. With those six answers a technician can usually arrive with the right parts rather than starting the diagnosis from scratch. That is the difference between one visit and two, and it is covered further on our DStv repairs page.
If it keeps happening
An installation that fails every few weeks has very little margin rather than an intermittent gremlin, and that is fixable. See how to improve a satellite signal and dish alignment. We work across Cape Town from Thornton, including Mitchells Plain and Durbanville.
Questions we get asked
The picture went off mid-programme. Will it come back on its own?
Can we watch anything at all while the signal is down?
Is it safe to let the children keep pressing buttons on the decoder?
Should I reset the decoder more than once?
It goes off at roughly the same time most evenings. Is that a coincidence?
Everything is back but one child's favourite channel is still missing. Why?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za