Northern Suburbs · Bellville

DStv work across Bellville's mix of buildings

Bellville is not one kind of address. An older house, a flat near the centre and a complex finished last year turn the same fault into three different jobs.

Satellite dishes on the roof of an apartment block above Bellville rooftops

There are few suburbs where the building matters as much as it does here. Within a few kilometres we work on freestanding houses carrying the same installation they were given twenty years ago, high-rise blocks with communal systems, townhouse complexes with rules about external fittings, and businesses running screens in more than one room. Working out which of those you are in settles most of the job before anyone arrives.

Where you areWhat the job usually isWhat decides it
Older freestanding houseRepairs and re-cabling on a system that has been added toThe state of the cable and connectors outside
Flat in a high-rise blockWork on your side of the wall point, or nothing at allWhether the building's shared system is at fault
Townhouse or newer complexA first installation, or a second pointWhat the scheme allows on the outside of the building
Shop, office or guest houseScreens planned room by roomHow many screens there are and how far apart

The high-rise flats near the centre

In a block with a communal dish, what serves you begins at a wall point and everything behind it belongs to the building. That single fact settles most Bellville flat calls before we get there. If your neighbours have a picture and you do not, the fault is on your side and it is ordinary work. If the whole stack is dark, it is the building's distribution and the body corporate has to act - we will tell you that rather than charge you to hear it in your own lounge.

Older blocks add their own history to this. Distribution equipment fitted when the building went up has often never been touched since, and one corroded joint in a service cupboard takes out the flats above it and nothing else. DStv in complexes and apartments goes through the arrangements, who owns what, and why the equipment recommended for a house is not what belongs in a block.

What years of small changes do to a house installation

The houses tell a different story. A system that has been on a house since the nineties has usually been extended for a second television, patched after a storm, and joined behind a cupboard by somebody who has since moved out. Each of those is a place for water and corrosion to start, and the symptom is not a dead installation but a fussy one: fine most of the time, breaking up in weather, a little worse each winter.

Where a run has been joined more than twice, replacing it end to end usually clears several problems at once and prevents the next one. Cabling and TV points explains how that is done with the least damage to walls and ceilings, and DStv repairs covers the fault-finding that comes first, because there is no sense replacing cable that was never the problem.

In older houses where the subscription has lapsed but the dish is still on the wall, OpenView is worth knowing about. It is free-to-air with no monthly subscription, runs on the OV512 decoder, carries over 20 TV and radio channels including SABC channels and e.tv, and uses a dish pointing north-east - which is where yours is already aimed. OpenView installation in Bellville covers what reusing an existing dish involves.

New complexes and what the developer left behind

Newer complexes usually arrive with something in the walls. Sometimes that is a complete installation, sometimes a coax point in the lounge and nothing beyond it, and occasionally a sleeve with no cable in it at all. It is worth establishing which before you buy a decoder. Where a shared system was fitted, what may be added to it is the scheme's decision, and the managing agent decides what is fixed to the outside of the building.

Freestanding houses have an option that flats do not. MultiChoice recommends the DStv Smart LNB for DStv Explora and most XtraView installations in single-unit dwellings, and states plainly that it is not suitable for multiple unit dwellings - which is worth knowing if somebody has quoted you one for a flat. Our Smart LNB page sets out both models MultiChoice names and what each of them carries.

Screens in a Bellville business

Guest houses, waiting rooms, shops and pubs are a planning job before they are an installation job, because the number of screens and the distance between them decides the design rather than the other way round. Cable routes in a commercial building have to survive a fit-out and whatever comes after it, and equipment usually has to live somewhere it cannot be interfered with. DStv for businesses covers what we look at, including working around trading hours and alongside whoever else is on site. Guest accommodation is worth planning as a whole rather than a room at a time, because the cable distances decide the design and they are far cheaper to get right before the walls are closed.

Questions we get asked in Bellville

The block was built in the seventies. Is its cabling likely to be the problem?
It is a fair suspicion. Distribution installed when a building went up has usually had decades of damp risers and nobody maintaining it, and faults in it affect several flats rather than one. If your neighbours are watching television and you are not, though, the age of the building is not your answer - the fault is on your side of the wall point.
Is it better to re-run one new cable than to keep repairing old joins?
On a run that has been joined several times, yes. Each join is a way in for water, and dealing with them one at a time tends to buy months rather than years. A single continuous run to the point is the repair that stops the calls.
We are moving from a house in Bellville into a flat. What comes with us?
The decoder, certainly. The dish, only if the flat allows one and the position works, which in a block with a communal system it usually will not. The cable is generally not worth moving. It is worth checking what the new building provides before you take anything off the wall.
We have screens in a waiting room. Is that a different kind of installation?
It is planned differently. Screen positions, cable distances and somewhere secure for the equipment all get settled before anything is fitted, and the work is usually arranged around your trading hours rather than through the middle of them.
We have a house and a flat in Bellville that both need attention. Can that be one visit?
Usually, if they are reasonably close together and we know about both when you book. Tell us what is wrong at each address so the technician arrives with the parts for both rather than the parts for one.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za