Southern Suburbs · Lansdowne
DStv installation and repairs in Lansdowne
On compact plots with houses close together, the thing that decides a satellite installation is not the garden. It is the roofline next door, and how many decoders the household is running.

Lansdowne sits on the flats side of the southern suburbs: freestanding houses and semis on compact plots, close enough together that the neighbour's roof is more often in the way than any tree, and plenty of homes with rooms added over the years. Two things follow from that. The obstruction we work around is a building rather than something that can be cut back, and there is usually more than one decoder in the house.
The obstruction here is usually the next roof
A dish needs a clear view to the north-east. On a large plot that means keeping clear of trees; on a compact one it means keeping clear of the neighbour's roof, their chimney, or the double storey that went up two summers ago. The difference matters, because a roof does not grow but it also does not get pruned.
So the position gets chosen from the roof rather than from the driveway, and sometimes the only workable spot is not the wall anyone would have picked. We would rather run a few extra metres of cable to a position that still works in five years than mount somewhere convenient and come back for a realignment. Dish installation covers what a sound mount looks like once the position is settled.
Two houses on the same street can need different positions for that reason, which is why we look from the roof before quoting rather than from a photograph. A picture taken from the pavement shows where the dish is. It does not show what the dish can see.
Mounting height, and when a dish has to go higher
Where a neighbouring roofline genuinely sits in the path, height is the answer: a longer pole, a gable position instead of a wall, or a move to the opposite side of the house. Height costs stability, though. A dish on a long pole catches far more of the wind that comes across the flats than one bolted close to a wall, and the fixing has to be specified for that rather than hoped about.
Done properly it is a permanent solution. Done badly it is a recurring alignment problem, because a mount that moves a fraction in every south-easter drifts, and drift shows up as a picture that fails on bad days and recovers on good ones. That pattern is worked through on dish alignment.
Running cable between close-set houses
With a metre or two between buildings, the cable route needs deciding before anyone starts. There is often no side access wide enough for a ladder where you would want it, the shortest path crosses a boundary it should not, or it runs over a neighbour's outbuilding roof. None of that is unusual in Lansdowne and all of it is easier to solve at the survey than halfway through the job.
Inside the house, added rooms are the complication. A room built onto the back with its own roof usually needs an external run to reach it, sealed where it enters. Cabling and TV points explains what makes that kind of run last.
- Where the ladder can safely stand, which often decides the dish position on a narrow plot
- Whether the run can stay on your property for its whole length
- How the cable gets to an added room that has no ceiling void
- What the existing installation is already carrying before another point is added
Several decoders in one household
Multiple decoders per household is the norm here rather than the exception, and it is worth being clear about what that asks of an installation. Every point takes a share of the signal, and a system put in for one decoder and split three times since is running on whatever is left over.
A linked pair is XtraView. Three or more rooms is a planning job, covered on multiroom installation. In a freestanding Lansdowne house, a Smart LNB is what MultiChoice recommends for an Explora and most XtraView installations, and because it sends multiple signals down one cable it is often the difference between a tidy job and three coax runs down the same wall.
The other thing worth doing in a house with several decoders is labelling. Most of the bedroom points we are called to were added by somebody else at some later date, and nothing is marked, so the first half hour of a fault call goes on working out which cable feeds which room. We label the runs while we are in there, and the next fault takes a fraction of the time.
Where the household wants a picture on one more set without another monthly subscription, OpenView is the free-to-air option — no monthly fee, and it can generally reuse a dish that is already pointing north-east. OpenView in Lansdowne sets out what is involved.
Adding a point to a room that is already finished
It is still very doable — the run usually goes outside and comes in behind the decoder — but the route decides how tidy it looks, so it is worth walking the room with us before anything is fixed to a wall. Chasing a finished wall is the option of last resort here, not the starting point.
Power faults and the televisions themselves
If the decoder is behaving and one television is not, the fault has moved indoors. TV repairs in Lansdowne covers the sets, including the power supply faults that follow a hard afternoon of tripping and surges.
Questions we get asked in Lansdowne
Our neighbour is putting up a second storey. Can that take our signal away?
Each of the children wants their own decoder. What does that mean for the installation?
We have three points already and want a fourth. Does the whole system have to be redone?
Our house is a semi. Does the work affect the neighbour's side of the wall?
Is a taller pole a proper fix or a temporary one?
Get it sorted
Book a technician
Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.
218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za