Southern Suburbs · Ottery

DStv installation, moves and repairs in Ottery

Ottery is an easy suburb to install in and a busy one for moves. A fair share of the work here is taking a system off one wall and putting it up properly a few streets away.

Satellite dish silhouetted against an open sky

Ottery gives a satellite installer a straightforward start. Roof access on the houses is simple, plots are open enough that the view to the north-east is usually clear, and there is rarely an argument about where a dish is allowed to go. What we do get a lot of is systems being moved, as households shift within the area and take the equipment with them.

Moving a system from one Ottery address to another

A move is two jobs that people book as one: taking a system down without damaging it, and putting it back up at an address whose walls, roof and cable routes are different. The second half is what decides whether the picture at the new house is as good as the picture at the old one. DStv relocation sets out the general order of work; what follows is what tends to matter locally.

The dish you already own

Most dishes are worth taking with you. They are reflectors, and age alone does not stop one working — what stops one is a dent, a bent arm, or a mount that has corroded past being safe to reuse. The parts more often past their best are the LNB on the end of the arm, the connectors and the cable, all of which have been outdoors for exactly as long as the dish has.

So the usual outcome of a move within Ottery is the same dish, fresh connectors and a new run. That combination gives a moved installation a genuine chance of behaving like a new one, and it is why we make connectors up fresh rather than reusing whatever came off the old wall.

What the new address decides

Everything else. Which elevation has the clear view, whether the old cable route has an equivalent at the new house, where the decoder is going to stand, and whether there is already a wall point worth testing. A short move is not a copy-and-paste of the old installation, and treating it as one is how a system that worked for years arrives at a new address as a marginal one.

  1. Book the two halves as one job where the move is local

    When both addresses are in the area, the equipment does not sit in a garage for a month between houses. That is where dishes get dented, arms get bent and connectors get pulled, and avoiding it costs nothing.

  2. Survey the new position before the old dish comes down

    We would rather know where the dish is going, and what the run will be, before anything is unbolted. It changes what we bring and it avoids a system standing in a passage while somebody works out the route.

  3. Test at the new address rather than assuming

    Any wall point already in the new house gets tested rather than trusted. Plenty of them are sound; plenty are old aerial coax that will not do the job, and the difference is not visible from the plate.

Clear sight lines, and why the fault is usually somewhere else

Because obstructions are rarely the issue on these plots, a no-signal call in Ottery is seldom about something standing in the path. It is far more often the cable, the connector at the dish end, or an aim that has drifted after years of wind across open ground.

Wind is the local factor. There is not much between an Ottery roof and the weather, and a bracket that was tightened rather than properly fixed gives up a fraction at a time until the picture starts failing on bad days and returning on good ones. If there is a code on screen it narrows things quickly: signal problems explains what E48 and its weather variant mean, while decoder problems covers the smartcard and subscription messages, which are a different family and not something a technician can clear.

  • Gradual decline over months, worse in rain — usually the aim, a connector or the cable
  • Failed overnight in clear weather and never came back — a component or a physical break
  • Fails in wind, fine when it drops — something is moving that should not be
  • A message about a card or a subscription — nothing to do with the installation

Small premises and workshops alongside the houses

Ottery's light-industrial units sit next to residential streets, and a screen in a workshop office or a reception has different requirements from one in a lounge. It is often mounted high and out of reach, the cable has to cross a steel structure rather than a brick wall, and the work has to happen without stopping the business for the afternoon. Roof sheeting and portal frames change the fixing entirely — business installations covers what we look at first.

On the residential side, households wanting a second set running without another monthly subscription sometimes go free-to-air instead. OpenView has no monthly fee and works off a dish pointing north-east, so an existing installation can often carry it — OpenView in Ottery explains what that involves.

Questions we get asked in Ottery

We are moving a few streets away. Is it better to move the system or start again?
Move it, in most cases. The dish and the bracket are usually reusable, and the work at the new address is the same whether the hardware is old or new. What we generally replace on the way is the cable and the connectors, because those are the parts that have aged outdoors.
The dish has been in the garage since we moved. Is it still usable?
Probably, if it is undented and the arm is straight. Storage does not harm a reflector. Check the mounting hardware for rust and expect the connectors to be remade, because a dish that has been lying about has usually had its cable ends knocked around.
Nothing is blocking our dish, so why does the picture still break up?
Line of sight is only one of the things that can go wrong. On an open plot like most in Ottery, the more likely causes are a bracket that has moved in the wind, water in the connector at the dish end, or a cable that has perished in the sun. All three are found by testing rather than by looking.
We want a screen in the workshop office. Is that different from a house installation?
The satellite side works the same way, but the building does not. Fixing into sheeting or steel, running cable in a commercial space and working around trading hours all change the job, so we survey the premises before quoting rather than treating it as a house with a bigger roof.
Who takes the dish down when we move out of a rented house?
Whoever owns it, which is worth establishing before the truck arrives. If the dish came with the property it stays; if you paid for it, it is yours to take. We can remove and remount either way, but it is a much calmer conversation had a week before the move than on the day.

Get it sorted

Book a technician

Tell us the make, the size and what the screen or decoder is doing. We will give you a time slot and a quote before anyone starts work.

218 Thornton Road
Thornton, Cape Town
info@capetvrepairs.co.za